Narex Wood Chisels - Narex 6 Pc Set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels In Wooden Presentation Box 853053

These chisels are made by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need final sharpening before use. These chisels are an excellent value in a good quality tool. This is a 6 piece set that contains the following sizes: 6 mm (1/4), 10 mm (3/8) 12 mm (1/2), 16 mm (5/8) 20 mm (13/16) and 26 mm (1 1/32). They are ground at a 25 degree bevel. Blades are 4  ...

$84.99

Narex Wood Chisels - Narex (made In Czech Republic) Premium 8 Pc Set 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16"), 32 (1 1/4") Mm Chisels W/ Hornbeam Handles

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a Premium 8 piece set contains the following sizes:6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16") and 32 (1 1/4") mm. They are ground at a 25 degree bevel. Blades are 4 5/8" to  ...

$97.99

Narex Wood Chisels - Narex Czech Steel Premium 4 Pc Set True Imperial 1/4", 1/2", 3/4", 1" Bench Cabinetmaker Chisels W/ Hornbeam Handles 863251

These chisels were made to our specifications by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they will need final honing and sharpening before use. This is a Premium true Imperial 4 piece set containing the following sizes: 1/4 inch, 1/2 inch. 3/4 inch and 1 inch. Blades are ground at a 25 degree bevel. Blades are 4 5/8 to to 5 1/2 inches long Handles are natural Hornbeam and are 5  ...

$52.99

Narex Wood Chisels - Narex 12 Piece Chisel Set Containing 3 Mm (1/8") 4 Mm (3/16"), 6 Mm (1/4"), 8 Mm (5/16"), 10 Mm (3/8") 12 Mm (1/2"), 16 Mm (5/8"), 20 Mm (11/16") , 26 Mm (1 1/16"), 32 Mm (1 1/4"), 40 Mm (1 5/8") And 50 Mm (2") 810103-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. This is a Premium 12 piece set contains the following sizes: 3 mm (1/8 inch) 4 mm (3/16 inch), 6 mm (1/4 inch), 8 mm (5/16 inch), 10 mm (3/8 inch) 12 mm (1/2 inch), 16 mm (5/8 inch), 20 mm (11/16 inch) , 26 mm (1" 1/16 inch), 32 mm (1 1/4 inch), 40 mm (1 5/8 inch) and 50 mm (2 inch). Blade bevels are ground at a 25 degree angle. Blades are 4 1/2 inch inches  ...

$119.99

Narex Wood Chisels - Chisel / Mortise Chisel Set - 4-pcs

This Set contains the following Chisels: 1 x 4 mm [0.15748 inch] 1 x 6 mm [0.23622 inch] 1 x 10 mm [0.39370 inch] 1 x 12 mm [0.47244 inch] - Blade length: 149 mm [5.866 inch] - Overall length: 304 mm [11.968 inch] - Handle: 155 mm x 46 mm [6.102 inch x 1.811 inch]  

$54.99

Narex 12 Piece Set Carving Chisels With 2 Knives And 10 Carving Chisels In Wooden Presentation Box 894850

This 12 piece carving chisel set is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 12 tools: 2 knives (large carving knife and chip carving knife), 3 mm straight chisel, 8 mm straight shallow gouge, 12 mm straight shallow gouge, 25 mm straight shallow gouge, 4 mm straight deep gouge, 16 mm straight deep gouge, 12 mm straight V tool, 6 mm bent V tool, 10 mm bent shallow gouge, 8 mm bent deep gouge. Please see pictures for more details. Blades are made from highly allowed Cr-Mn steel and heat treated to HRc 55. Chisel handles are European Beech with an octagonal cross section. Knife blades  ...

$179.99

Narex Czech Steel 8 Pc Set 6, 8, 10, 12, 16, 20, 26, 32 Mm Chisels

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a 8 piece set contains the following sizes: 6 mm (1/4"), 8 mm (5/16"), 10 mm (3/8") 12 mm (1/2"), 16 mm (5/8") 20 mm (13/16"), 26 mm (1 1/32") and 32 mm (1/14"). They are ground at a 25 degree bevel.  ...

$73.99

Narex 6 Pc Set 4 Mm, 5 Mm, 6 Mm, 8 Mm, 10 Mm, And 12 Mm Mortise Chisels 811204-811212

This 6 piece set of mortise chisels is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades takes and holds an excellent edge. The blades are accurately ground. As with all edge tools, they will require some sharpening before use. These mortise chisels are an excellent value for a good quality tool. This is a set of 6 mortise chisels. It contains a 4, 5 6, 8 10 and 12 mm chisels. The blades are 5 7/8 inches long and are ground at a 25 degree bevel. The blade widths taper .030 inches from tip to shoulder  ...

$74.99

Narex Premium 12 Pc Set 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8"), 18 (3/4"), 20 (11/16") , 26 (1" 1/16"), 30 (1 1/8"), 32 (1 1/4"), 40 (1 5/8") And 50 (2") Mm Chisels W/ Hornbeam Handles 811604-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all fine edge tools, they will need sharpening/honing before use. These chisels are an excellent value in a good quality tool. This is a Premium 12 piece set contains the following sizes: 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8"), 18 (3/4"), 20 (11/16") , 26 (1 1/16"), 30 (1 1/8"), 32 (1 1/4"), 40 (1 5/8") and 50 (2") mm.  ...

$139.99

Narex (made In Czech Republic) Premium 8 Pc Set 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16"), 32 (1 1/4") Mm Chisels W/ Hornbeam Handles

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a Premium 8 piece set contains the following sizes:6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16") and 32 (1 1/4") mm. They are ground at a 25 degree bevel. Blades are 4 5/8" to  ...

$97.99

Narex 6 Pc Set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels In Wooden Presentation Box 853053

These chisels are made by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need final sharpening before use. These chisels are an excellent value in a good quality tool. This is a 6 piece set that contains the following sizes: 6 mm (1/4), 10 mm (3/8) 12 mm (1/2), 16 mm (5/8) 20 mm (13/16) and 26 mm (1 1/32). They are ground at a 25 degree bevel. Blades are 4  ...

$84.99

Narex 5 Piece Set Engraving Graving Palm Carving Chisels For Woodcut 868300

This 5 piece set of graving or engraving chisels are handmade by a highly respected tool manufacturer in the Czech Republic, are of the highest quality and are designed for professional carvers. Blades are made of Chrome-Vanadium tool steel and heat treated to a hardness of 61-62 HRc. The edges are hand sharpened and lapped with abrasive paste and an Arkansas stone. Handles are stained and waxed European Beech wood. Set included a 4 mm (3/16") flat chisel, 3 mm (1/8") gouge, 6 mm (1/4") gouge, 8 mm (3/8") gouge, and 3 mm V tool. Blades are 70 mm (2 7/8") long and handles are 82 mm (3 3/8") long x 40 mm (1 5/8") in diameter. Handle have a  ...

$62.99

Narex Rasp - Narex 250 Mm 10" Half Round Cabinetmaker Wood Coarse Cut Rasp 872523

TThis 250 mm (10") half round coarse cut rasp is made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The blade is made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. This is considered a coarse cut rasp with 12 teeth per square centimeter. The handle is 5 3/4 inch long, 1 1/2 inches in diameter and has a brass ferrule. Handle is made hard and dense Hornbeam. Blade is 25 mm (1 inch) by 8 mm (5/16 inch) and 250 mm (10") long. Overall length  ...

$49.99

Narex Czech Steel Premium 4 Pc Set True Imperial 1/4", 1/2", 3/4", 1" Bench Cabinetmaker Chisels W/ Hornbeam Handles 863251

These chisels were made to our specifications by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they will need final honing and sharpening before use. This is a Premium true Imperial 4 piece set containing the following sizes: 1/4 inch, 1/2 inch. 3/4 inch and 1 inch. Blades are ground at a 25 degree bevel. Blades are 4 5/8 to to 5 1/2 inches long Handles are natural Hornbeam and are 5  ...

$52.99

Narex Rasp - Narex 3 Piece Set Round Rattail, Half Round And Rectangular 150 Mm Cabinetmaker Wood Course Cut Rasp 854201

This is a set of 3 course rasps made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 3 course cut rasps: 6 mm round, 16 mm wide rectangular and 16 mm wide halfround. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. These are considered course cut rasps with 20 teeth per square centimeter. Handles are 145 mm long, 36 mm in diameter and have solid brass ferrules. Handles are made from hard and dense European Hornbeam. Rectangular and half  ...

$97.50

Narex 6 Piece Professional Carving Chisels With 2 Straight Gouge ½ And 11/16", 2 Curved Gouge 5/16" And 1/2", V Tool, Veining Tool 869950

This professional 6 piece carving chisel set is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 6 tools: straight gouge ½ inch wide, straight gouge 11/16 wide, curved gouge 5/16 wide, curved gouge ½ wide, 3/8 wide V tool and 1/8 wide veining tool. Blades are made from chrome-silicon alloy steel and heat treated for hardness of 59HRc. The edges are sharpened and lapped with abrasive paste and an Arkansas stone. Handles are made of stained and waxed European beach wood. Blades are 4 inches long and handles are 5 ½ inches long. This chisel set is an excellent value for professional quality tools and will make  ...

$199.95

Narex 6 Piece Set Carving Chisels Curved Skews, Curved Straight, Curved V Tool And Straight Skew Chisel 894710

This 6 piece carving chisel set is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 6 tools: curved straight chisel 1/2" wide, right and left curved skewed chisels 1/2" wide, straight chisel 1/2" wide, curved gouge 7/16" wide and curved V tool 3/8" wide. Blades are made from highly allowed Cr-Mn steel and heat treated to HRc 55. Chisel handles are European Beech with an octagonal cross section. Blades are all 3 1/2" long and handles are 4" long by 5/8" wide. As with all fine carving tools, these will need final sharpening/honing to fully refine the edges before use. This chisel set is an excellent value  ...

$69.95

Narex 3 Piece Set Round Rattail, Half Round And Rectangular 200 Mm Cabinetmaker Wood Course Cut Rasp 854202

This is a set of 3 course rasps made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 3 course cut rasps: 8 mm round, 20 mm wide rectangular and 20 mm wide halfround. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. These are considered course cut rasps with 16 teeth per square centimeter. Handles are 145 mm long and 36 mm in diameter and have solid brass ferrules. Handles are made from hard and dense European Hornbeam. Rectangular and  ...

$53.99

Narex Huge Full Size Professional Lathe Wood Turning Roughing Gouge Tool Chisel W/ 1 1/4" Wide X 6" Long High Speed Tool Steel Blade 650 Mm (26.5") Overall Length 64 Hrc 819432

This lathe wood turning tool is made by a highly respected tool manufacturer in the Czech Republic. This is a roughing gouge chisel with a blade that is 1 1/4" wide by 150 mm (6 inches) long. Handle is made from natural varnished European Beech and is 500 mm (20 3/8 inches) long. Overall length of the tool is 650 mm (26.5 inches). Tool bar is made from heat treated high speed tool steel and hardened to HRc 64 and will hold an edge for a very long time. This is a good quality lathe tool at a very reasonable price.  ...

$68.99

Narex 12 Piece Chisel Set Containing 3 Mm (1/8") 4 Mm (3/16"), 6 Mm (1/4"), 8 Mm (5/16"), 10 Mm (3/8") 12 Mm (1/2"), 16 Mm (5/8"), 20 Mm (11/16") , 26 Mm (1 1/16"), 32 Mm (1 1/4"), 40 Mm (1 5/8") And 50 Mm (2") 810103-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. This is a Premium 12 piece set contains the following sizes: 3 mm (1/8 inch) 4 mm (3/16 inch), 6 mm (1/4 inch), 8 mm (5/16 inch), 10 mm (3/8 inch) 12 mm (1/2 inch), 16 mm (5/8 inch), 20 mm (11/16 inch) , 26 mm (1" 1/16 inch), 32 mm (1 1/4 inch), 40 mm (1 5/8 inch) and 50 mm (2 inch). Blade bevels are ground at a 25 degree angle. Blades are 4 1/2 inch inches  ...

$119.99

Narex Wood Chisels Products
Other Products

More Buying Choices