Narex Wood Chisels - Chisel / Mortise Chisel Set - 4-pcs

This Set contains the following Chisels: 1 x 4 mm [0.15748 inch] 1 x 6 mm [0.23622 inch] 1 x 10 mm [0.39370 inch] 1 x 12 mm [0.47244 inch] - Blade length: 149 mm [5.866 inch] - Overall length: 304 mm [11.968 inch] - Handle: 155 mm x 46 mm [6.102 inch x 1.811 inch]  

$54.99

Narex Wood Chisels - Narex 12 Piece Chisel Set Containing 3 Mm (1/8") 4 Mm (3/16"), 6 Mm (1/4"), 8 Mm (5/16"), 10 Mm (3/8") 12 Mm (1/2"), 16 Mm (5/8"), 20 Mm (11/16") , 26 Mm (1 1/16"), 32 Mm (1 1/4"), 40 Mm (1 5/8") And 50 Mm (2") 810103-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. This is a Premium 12 piece set contains the following sizes: 3 mm (1/8 inch) 4 mm (3/16 inch), 6 mm (1/4 inch), 8 mm (5/16 inch), 10 mm (3/8 inch) 12 mm (1/2 inch), 16 mm (5/8 inch), 20 mm (11/16 inch) , 26 mm (1" 1/16 inch), 32 mm (1 1/4 inch), 40 mm (1 5/8 inch) and 50 mm (2 inch). Blade bevels are ground at a 25 degree angle. Blades are 4 1/2 inch inches  ...

$119.99

Chisel / Mortise Chisel Set - 4-pcs

This Set contains the following Chisels: 1 x 4 mm [0.15748 inch] 1 x 6 mm [0.23622 inch] 1 x 10 mm [0.39370 inch] 1 x 12 mm [0.47244 inch] - Blade length: 149 mm [5.866 inch] - Overall length: 304 mm [11.968 inch] - Handle: 155 mm x 46 mm [6.102 inch x 1.811 inch]  

$54.99

Chisel / Mortise Chisel Set - 4-pcs

This Set contains the following Chisels: 1 x 4 mm [0.15748 inch] 1 x 6 mm [0.23622 inch] 1 x 10 mm [0.39370 inch] 1 x 12 mm [0.47244 inch] - Blade length: 149 mm [5.866 inch] - Overall length: 304 mm [11.968 inch] - Handle: 155 mm x 46 mm [6.102 inch x 1.811 inch]  

$54.99

Narex 6 Pc Set 4 Mm, 5 Mm, 6 Mm, 8 Mm, 10 Mm, And 12 Mm Mortise Chisels 811204-811212

This 6 piece set of mortise chisels is made by a small tool manufacturer in the Czech Republic and is of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades takes and holds an excellent edge. The blades are accurately ground. As with all edge tools, they will require some sharpening before use. These mortise chisels are an excellent value for a good quality tool. This is a set of 6 mortise chisels. It contains a 4, 5 6, 8 10 and 12 mm chisels. The blades are 5 7/8 inches long and are ground at a 25 degree bevel. The blade widths taper .030 inches from tip to shoulder  ...

$74.99

Narex 12 Piece Chisel Set Containing 3 Mm (1/8") 4 Mm (3/16"), 6 Mm (1/4"), 8 Mm (5/16"), 10 Mm (3/8") 12 Mm (1/2"), 16 Mm (5/8"), 20 Mm (11/16") , 26 Mm (1 1/16"), 32 Mm (1 1/4"), 40 Mm (1 5/8") And 50 Mm (2") 810103-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. This is a Premium 12 piece set contains the following sizes: 3 mm (1/8 inch) 4 mm (3/16 inch), 6 mm (1/4 inch), 8 mm (5/16 inch), 10 mm (3/8 inch) 12 mm (1/2 inch), 16 mm (5/8 inch), 20 mm (11/16 inch) , 26 mm (1" 1/16 inch), 32 mm (1 1/4 inch), 40 mm (1 5/8 inch) and 50 mm (2 inch). Blade bevels are ground at a 25 degree angle. Blades are 4 1/2 inch inches  ...

$119.99

Matsumura Japanese White Steel Mortise Chisel - 12mm - 1/2"

Mortise Chisels are made with a square section and a heavy body. They are intended for deep mortise work in carpentry and heavy cabinet work. Mr. Matsumura handforges these blades from "white" steel laminated to wrought iron and tempers each blade to Rc 64. The blades are finished in the traditional manner. The handles are hand-turned from best quality Akagashi (Japanese Red Oak), noted for its strength and endurance. The handles are double hooped to stand-up to heavy work. Each Mortise Chisel is fully sharpened. The overall length is 12" and the blade length is 3-1/2".

$116.44

Narex Huge Full Size Professional Lathe Wood Turning Roughing Gouge Tool Chisel W/ 1 1/4" Wide X 6" Long High Speed Tool Steel Blade 650 Mm (26.5") Overall Length 64 Hrc 819432

This lathe wood turning tool is made by a highly respected tool manufacturer in the Czech Republic. This is a roughing gouge chisel with a blade that is 1 1/4" wide by 150 mm (6 inches) long. Handle is made from natural varnished European Beech and is 500 mm (20 3/8 inches) long. Overall length of the tool is 650 mm (26.5 inches). Tool bar is made from heat treated high speed tool steel and hardened to HRc 64 and will hold an edge for a very long time. This is a good quality lathe tool at a very reasonable price.  ...

$68.99

Narex 6 Piece Set Carving Chisels Curved Skews, Curved Straight, Curved V Tool And Straight Skew Chisel 894710

This 6 piece carving chisel set is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 6 tools: curved straight chisel 1/2" wide, right and left curved skewed chisels 1/2" wide, straight chisel 1/2" wide, curved gouge 7/16" wide and curved V tool 3/8" wide. Blades are made from highly allowed Cr-Mn steel and heat treated to HRc 55. Chisel handles are European Beech with an octagonal cross section. Blades are all 3 1/2" long and handles are 4" long by 5/8" wide. As with all fine carving tools, these will need final sharpening/honing to fully refine the edges before use. This chisel set is an excellent value  ...

$69.95

Narex Wood Chisels - Narex 6 Pc Set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels In Wooden Presentation Box 853053

These chisels are made by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need final sharpening before use. These chisels are an excellent value in a good quality tool. This is a 6 piece set that contains the following sizes: 6 mm (1/4), 10 mm (3/8) 12 mm (1/2), 16 mm (5/8) 20 mm (13/16) and 26 mm (1 1/32). They are ground at a 25 degree bevel. Blades are 4  ...

$84.99

Narex Rasp - Narex 250 Mm 10" Half Round Cabinetmaker Wood Coarse Cut Rasp 872523

TThis 250 mm (10") half round coarse cut rasp is made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The blade is made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. This is considered a coarse cut rasp with 12 teeth per square centimeter. The handle is 5 3/4 inch long, 1 1/2 inches in diameter and has a brass ferrule. Handle is made hard and dense Hornbeam. Blade is 25 mm (1 inch) by 8 mm (5/16 inch) and 250 mm (10") long. Overall length  ...

$49.99

Narex Wood Chisels - Narex (made In Czech Republic) Premium 8 Pc Set 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16"), 32 (1 1/4") Mm Chisels W/ Hornbeam Handles

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a Premium 8 piece set contains the following sizes:6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16") and 32 (1 1/4") mm. They are ground at a 25 degree bevel. Blades are 4 5/8" to  ...

$97.99

Narex Wood Chisels - Narex Czech Steel Premium 4 Pc Set True Imperial 1/4", 1/2", 3/4", 1" Bench Cabinetmaker Chisels W/ Hornbeam Handles 863251

These chisels were made to our specifications by a highly respected tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they will need final honing and sharpening before use. This is a Premium true Imperial 4 piece set containing the following sizes: 1/4 inch, 1/2 inch. 3/4 inch and 1 inch. Blades are ground at a 25 degree bevel. Blades are 4 5/8 to to 5 1/2 inches long Handles are natural Hornbeam and are 5  ...

$52.99

Narex Rasp - Narex 3 Piece Set Round Rattail, Half Round And Rectangular 150 Mm Cabinetmaker Wood Course Cut Rasp 854201

This is a set of 3 course rasps made by a highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 3 course cut rasps: 6 mm round, 16 mm wide rectangular and 16 mm wide halfround. The blades are made from tool steel and then hardened to RC 45. The blades are stitched with a CNC machine which produces a uniform tooth pattern and height allowing for a steady removal rate and an even finish. These are considered course cut rasps with 20 teeth per square centimeter. Handles are 145 mm long, 36 mm in diameter and have solid brass ferrules. Handles are made from hard and dense European Hornbeam. Rectangular and half  ...

$97.50

Soss Mortise Mount Invisible Barrel Hinge, Solid Brass, Satin Brass Finish, 24mm Diameter, 1-1/4" Door Thickness, 25mm Mortise Depth (pack Of 12)

Soss invisible barrel hinges are made of solid brass with brass links. They are easily installed. Soss invisible barrel hinges are totally invisible from either side when the door is closed. Soss Invisible barrel hinges are not recommended for vertical or load bearing application. Satin brass finish. 24mm Barrel diameter. 1-1/4" Door thickness. 25mm Mortise depth.

$57.37

Soss Barrel Hinges - Soss Mortise Mount Invisible Barrel Hinge, Solid Brass, Satin Brass Finish, 16mm Diameter, 7/8" Door Thickness, 16.5mm Mortise Depth (pack Of 24)

Soss invisible barrel hinges are made of solid brass with brass links. They are easily installed. Soss invisible barrel hinges are totally invisible from either side when the door is closed. Soss Invisible barrel hinges are not recommended for vertical or load bearing application. Satin brass finish. 16mm Barrel diameter. 7/8" Door thickness. 16.5mm Mortise depth.

$60.38

Narex Czech Steel 8 Pc Set 6, 8, 10, 12, 16, 20, 26, 32 Mm Chisels

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a 8 piece set contains the following sizes: 6 mm (1/4"), 8 mm (5/16"), 10 mm (3/8") 12 mm (1/2"), 16 mm (5/8") 20 mm (13/16"), 26 mm (1 1/32") and 32 mm (1/14"). They are ground at a 25 degree bevel.  ...

$73.99

Narex Premium 12 Pc Set 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8"), 18 (3/4"), 20 (11/16") , 26 (1" 1/16"), 30 (1 1/8"), 32 (1 1/4"), 40 (1 5/8") And 50 (2") Mm Chisels W/ Hornbeam Handles 811604-50

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all fine edge tools, they will need sharpening/honing before use. These chisels are an excellent value in a good quality tool. This is a Premium 12 piece set contains the following sizes: 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8"), 18 (3/4"), 20 (11/16") , 26 (1 1/16"), 30 (1 1/8"), 32 (1 1/4"), 40 (1 5/8") and 50 (2") mm.  ...

$139.99

Narex Czech Steel Set Of 4 Premier Firmer Gouges 8 Mm (5/16") 10 Mm (3/8") 16 Mm (11/16") 26 Mm (1 1/6") 863700f

These premium firmer gouges are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades taper in height which improves penetration into wood. Blades have a black coating to resist wear and corrosion. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a 4 piece set contains the following sizes: 8, 10, 16, 26 mm. The back bevels are ground at a 25 degree bevel. Blades are 4 3/4" to 5 1/8" long. Handles are waxed  ...

$84.99

Narex Czech Steel Set Of 4 Premier Firmer Gouges 8 Mm (5/16") 10 Mm (3/8") 16 Mm (11/16") 26 Mm (1 1/6") 863700f

These premium firmer gouges are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades taper in height which improves penetration into wood. Blades have a black coating to resist wear and corrosion. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a 4 piece set contains the following sizes: 8, 10, 16, 26 mm. The back bevels are ground at a 25 degree bevel. Blades are 4 3/4" to 5 1/8" long. Handles are waxed  ...

$84.99

Narex Mortise Chisel Products
Other Products

More Buying Choices