Dorian Tool Er20 Alloy Steel Ultra Precision Collet Set, 0.039" - 0.511" Hole Size (set Of 12)

Dorian Tool 12 piece ultra precision collet set. Set includes collet sizes: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13-millimeters. Set comes in a professional grade aluminum/plastic case. ER Collet features 16 full length slits, enabling the collet to collapse uniformly to provide a concentric and full 360 degree gripping surface. It is inspected to be precise within 0.0002-inches or better prior to shipping. ER collet system is made of special elastic steel material under excellent heat treatment and precise grinding process, so it has precise accuracy, powerful clamping ability, and is durable. Place collet inside collet nut and rotate the nut to engage with the extractor spiral in collet groove. Only then mount nut and  ...

$153.81

R8 Collet Set - Accusizetools - 12 Pcs/set Er32 Collet + R8 Bridgeport Shank + Wrench In Fitted Box, #0223-0974

29 Pc R8 Collet Set Fractional 1/32" - 1" High Precision for Bridgeport

$199.00

3kw 220v Er20 Collet Air Cooled Cnc Spindle Motor And 3kw 220v Vfd Variable Frequency Drive

Technical Parameter of 3KW Air-cooled Spindle motor 1.Spec: 200mm*100*85 mm (Diameter:200mm lenth*100mm width x 85mm height) 2.Power:3KW 3.Voltage:220V 4.Frequency:300HZ 5.Speed: 0-18000 R/min 6.AIR- Cooling 7.Runout off:Less than 0.005mm 8.Grease Lubrication Technical Paramer for 3kw Variable Frequency Drive inverter 1.Input Voltage: 220V(We also stock 380V, please contact us for item stock) 2.Output voltage:208-240V(Analogous to Input voltage) 3.Input Frequency:48-63HZ 4.Output Frequency:0-400HZ 5.Input Phase:Suit for 1 phase input and 3 Phase input 6.Output:3 Phase 7.Warranty:1 year

$426.00

Er 20 Collet - Pro Series By Hhip 3901-5063 R8 Er-20 Collet Chuck Drawbar End Collet Chuck With Hex Nut

Pro R8 ER-20 Collect Chuck with Drawbar End ~ Made of 20CrMnTi alloy steel ~ Electrolysis nickel coating ~ Premium hardened & all ground body for extended tool life.~ Thread of Drawbar End: R8- 7/16" -20 ~ Maximum RPM is 8,000 ~ T.I.R.

$76.08

Konmison Cnc Spindle Motor Kits Milling Spindle Motor 80mm 2.2kw + 13pcs Er20 Collet + 80mm Clamp Mount + Inverter + 5m Water Pipe + Water Pump

Feature:Power: 2.2KWSize: 80mmVoltage: 220VFrequency: 0-400HzSpeed: 0-24000rpmCooling: Water CoolingRunout off: less than 0.001mmGrease LubricationSpeed Ways: Through the inverter output voltage and adjust the operating frequency can be achieved 0-24000 stepless4pcs bearingsBearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DTPower Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter groundMain Application: Engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board (ABS) and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working Package including:1pcs 2.2KW spindle motor13pcs ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm,  ...

$439.99

Vfd Spindle - 3kw 220v Er20 Collet Air Cooled Cnc Spindle Motor And 3kw 220v Vfd Variable Frequency Drive

Technical Parameter of 3KW Air-cooled Spindle motor 1.Spec: 200mm*100*85 mm (Diameter:200mm lenth*100mm width x 85mm height) 2.Power:3KW 3.Voltage:220V 4.Frequency:300HZ 5.Speed: 0-18000 R/min 6.AIR- Cooling 7.Runout off:Less than 0.005mm 8.Grease Lubrication Technical Paramer for 3kw Variable Frequency Drive inverter 1.Input Voltage: 220V(We also stock 380V, please contact us for item stock) 2.Output voltage:208-240V(Analogous to Input voltage) 3.Input Frequency:48-63HZ 4.Output Frequency:0-400HZ 5.Input Phase:Suit for 1 phase input and 3 Phase input 6.Output:3 Phase 7.Warranty:1 year

$409.00

Vfd Spindle - Konmison Cnc Spindle Motor Kits Milling Spindle Motor 80mm 2.2kw + 13pcs Er20 Collet + 80mm Clamp Mount + Inverter + 5m Water Pipe + Water Pump

1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 220V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER11 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: Type: 2.2KW/220V Input: 220VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 220V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes:  ...

$439.99

Vfd Spindle - Mysweety Cnc Spindle Motor Kits, 2.2kw Water Cooled Spindle Motor 2.2kw Inverter + 80mm Clamp Mount +13pcs Er20 Collet + 5m Water Pipe + Water Pump For Cnc Router

1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 220V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER11 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: Type: 2.2KW/220V Input: 220VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 220V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes:  ...

$429.99

Vfd Motor - Mysweety 1set Diy 110v 2200w Water Cooled Spindle Motor Cnc Spindle Motor 80mm 2.2kw + 13pcs Er20 Collet + 80mm Clamp + Converter + 5m Water Pipe + 110v Water Pump

1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 110V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER20 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: Type: 2.2KW/110V Input: 110VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 110V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes:  ...

$459.99

Rdo Equipment - Centaur Precision Tools - Rdo44 Collet 27.5-27 - Collet, Rdo 44, 27.5 To 27mm

High-grade, hardened, precision-ground spring steel construction extends product life. Wide clamping range for fewer changes, covering a continuous range of sizes. High accuracy for rigid clamping and extra concentricity. This listing is for each. Technical Specification Item Collet Collet Series RDO44 Range 44 27.5-27 Size 27.5 To 27mm For Use With Collet Chucks

$86.81

R8 Collet Set - 13pcs Precision R8 Collets Set 1/8 - 7/8" Mill Chuck Holder For Bridgeport .0006

Item description: Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Material:65Mn Hardness:Clamping part HRC 55-60 elastic part HRC 40-45 Applicable:This unit is applicable to all sorts of milling machines,which spindle taper hole is R8.

$54.99

R8 Collet Set - Betooll 23pcs Precision R8 Collets Set 1/16 - 3/4" Mill Chuck Holder For Bridgeport .0006

Item description: Size: 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 13/32" 7/16" 15/32" 7/16" 15/32" 9/16" 19/32" 5/8" 21/32" 11/16" 23/32" 3/4" Accuracy .0006" TIR Drawbar Thread: 7/16"-20 Material:65Mn Hardness:Clamping part HRC 55-60 elastic part HRC 40-45 Applicable:This unit is applicable to all sorts of milling machines,which spindle taper hole is R8.

$95.59

R8 Rotating Collet Holder Set

Includes: (1) R8 collet rack. (1) 12 Piece R8 round collet set sizes 1/8" thru 3/4" by 16ths plus 7/8".

$77.49

Steelex M1079 R-8 Collet Set

Made from the highest-grade steel available for collet manufacture these collets are precision ground to very close tolerances. Complete 12 piece set. Includes: 1/8" thru 3/4" in 1/16" increments plus 7/8". R-8 COLLET SET - 12 PIECE.

$70.36

Beall 1-1/4" Collet Chuck Set

Beall Collet Chucks are designed to hold small parts for turning very exactly, and without marring. Interchangeable collets get a tight grip on round tenon ended stock. Parts are turned with the tailstock end only, so turning can occur on both the sides and end of the turning without interference. Collets hold so well that hand tightening is usually sufficient for most work. Also useful for holding mandrels, small shop made face plates, metal turning blanks, and special jam chucks. Chuck and collets are precision ground to machinist tolerances. Size of collet refers to internal diameter before chucking. Chuck fits lathes using 1-1/4" x 8 tpi spindles. Complete Set - Includes chuck, five collet sizes (1/4", 3/8", 1/2", 5/8", and 3/4), and spanner.  ...

$162.99

23 Pc R8 Collet Set 1/16" - 1/4" High Precision For Bridgeport

Sizes: 1/16'' 3/32'' 1/8'' 5/32'' 3/16'' 7/32'' 1/4'' 9/32'' 5/16'' 11/32'' 3/8'' 13/32'' 7/16'' 15/32'' 1/2'' 17/32'' 9/16'' 19/32'' 5/8'' 21/32'' 11/16'' 23/32'' 3/4''

$99.90

23 Pc R8 Collet Set 1/16" - 1/4" High Precision For Bridgeport

Sizes: 1/16'' 3/32'' 1/8'' 5/32'' 3/16'' 7/32'' 1/4'' 9/32'' 5/16'' 11/32'' 3/8'' 13/32'' 7/16'' 15/32'' 1/2'' 17/32'' 9/16'' 19/32'' 5/8'' 21/32'' 11/16'' 23/32'' 3/4''

$99.90

29 Pc R8 Collet Set Fractional 1/32" - 1" High Precision For Bridgeport

29 Pc R8 Collet Set Fractional 1/32" - 1" High Precision for Bridgeport

$107.50

29 Pc R8 Collet Set Fractional 1/32" - 1" High Precision For Bridgeport

29 Pc R8 Collet Set Fractional 1/32" - 1" High Precision for Bridgeport

$107.50

Er20 Collet Set Products
Other Products

More Buying Choices